P0301
System
Powertrain (Engine)
Wymagany skaner
Basic OBD2 code reader (engine codes, live data, smog readiness)

Cylinder 1 Misfire Detected

Understand P0301, common causes, and the right FOXWELL scanner to diagnose it.

The ECU detected repeated misfires on cylinder 1 only. Unlike P0300 (random/multiple misfire), P0301 points to a specific cylinder — spark, fuel, or compression on that bore.

Typowe objawy

  • Rough idle that may feel rhythmic
  • Loss of power under load
  • Check engine light (steady or flashing)
  • Possible fuel smell from unburned fuel

Typowe przyczyny

  • Worn spark plug or failed ignition coil on cylinder 1
  • Clogged or leaking fuel injector for cylinder 1
  • Low compression on cylinder 1 (valve, ring, or head gasket)
  • Vacuum leak affecting one runner (intake gasket, cracked hose)
  • Loose or damaged coil-on-plug boot on cylinder 1

Jakiego skanera potrzebujesz?

Basic OBD2 code reader (engine codes, live data, smog readiness)

Używaj danych na żywo i freeze frame przed wymianą części. Kody ABS, SRS i U często wymagają skanera wielosystemowego.

Wskazówki diagnostyczne

  • Zapisz freeze frame, gdy kod pojawi się po raz pierwszy
  • Wyczyść kod dopiero po usunięciu przyczyny
  • Sprawdź powiązane kody oczekujące
  • Upewnij się, że akumulator ma powyżej 12,4 V, zanim podejrzewasz czujnik

Polecane skanery FOXWELL

Często zadawane pytania

Can I diagnose P0301 with a basic code reader?
Yes — P0301 is typically accessible with a basic OBD2 code reader like the FOXWELL NT201 or NT301. Live data helps confirm the repair.
Is it safe to drive with P0301?
It depends on the code and symptoms. Flashing check engine lights and misfire codes should be addressed immediately. Consult a professional if unsure.